Filter Close
View as

  • MAP Pilot

    $600.00
    The MAP Pilot is a state-of-the-art marine autopilot by MAP Marine Technologies (MAP-Tech), designed as a navigational aid independent of any specific steering system. With a built-in GPS unit and 9-axis IMU, the MAP Pilot provides precise track control of your vessel. The destination of your vessel can be set easily through the MAP Application, to which the autopilot seamlessly connects, providing you with both autonomous and manual control of the boat.

  • MAP Explorer500

    $200.00
    Handheld GPS with a 5-inch touchscreen. A user-friendly device cased in a ruggedized and weatherproof exterior, Bluetooth and WiFi enabled make the MAP Explorer500 the perfect navigation companion on the road or out at sea.

  • MAP Explorer10

    $1,200.00
    The MAP Explorer10 is a 10” multifunction display (MFD) from MAP Marine Technologies, an LCD touchscreen equipped with the Android OS. With access to the controls and settings of the MAP Pilot, you can use the MAP EXP10 to steer your vessel. The interface of the MFD is also fully customizable, with visual and auditory capabilities, allowing you to build your own entertainment system for the boat.

  • MAP ETK : Single Station, Single Engine

    $3,325.00
    The MAP Electronic Throttle Kit (MAP ETK) seamlessly interfaces with the engine control of your vessel. Customizable with multiple types of propulsion systems (outboard, inboard, and electric), the kit is encased in a ruggedized, water-tight enclosure, with the shift and throttle actuators in a single housing. For a single control station, the kit is packaged with a Single Engine Controller (SEC) from MAP Marine Technologies. For an additional set of actuators, please refer to the MAP ETK: Single Station, Dual Engine. With every additional helm, no further setup is required, since each kit is available in a simple plug-n-play configuration. [Also see: MAP ETK Dual Engine Kit]

  • MAP ETK: Single Station, Dual Engine

    $6,487.00
    The MAP Electronic Throttle Kit (MAP ETK) seamlessly interfaces with the engine control of your vessel. Customizable with multiple types of propulsion systems (outboard, inboard, and electric), the kit is encased in a ruggedized, water-tight enclosure, with the shift and throttle actuators in a single housing. Depending on the number of control stations required, the MAP ETK is sold with either the Single or Dual Engine Controller (S/DEC). In the MAP ETK: Single Station, Dual Engine, two throttle-and-shift actuator assemblies are packaged with a DEC. With every additional helm, no further setup is required, since each kit is available in a simple plug-n-play configuration.

  • MAP Interface Box

    $15,600.00
    The MAP Interface Box (MIB) provides high versatility in the kinds of data accessible over the USV-GCS network. Encased in a rugged IP67 enclosure with a sleek aluminum front panel, it allows the integration of various marine sensors with the network of your MAP Pro Autonomous Conversion System. It acts as a bridge between commercial off-the-shelf sensors and the MAP Pro, converting data from NMEA2000 into IP for transmission over the Internet.

  • MAP Pro

    The MAP Pro is the marine autopilot at the heart of the MAP Pro Autonomous Conversion Kit. It transforms any ordinary boat into a fully functioning, remotely operated, unmanned surface vessel (USV). With its in-built navigational aids, the MAP Pro provides autonomous navigation over predetermined routes through a system of waypoints, even in GPS-denied environments. It is customizable with any propulsion system upon integration with the shift and throttle assembly of the USV, providing high-precision track control. If you wish to purchase this product, please send us an inquiry on [email protected]

  • C2 Pro

    $13,900.00
    The C2 Pro is a mobile ground control station (GCS) from MAP Marine Technologies, a portable platform to control any unmanned surface vessel (USV) equipped with the MAP Pro Autonomous Conversion System. The multi-functional GCS is easily customized, mobilized and operated, thereby satisfying the requirements of a wide spectrum of remotely operated missions. The C2 Pro connects to your USV from anywhere in the world, providing full control over the steering, propulsion, and payload systems of your vessel.

  • MAP GPS Antenna

    $12.50
    GPS Antenna that connects to the in-built GPS Module in MAP Pilot and MAP Pro to provide navigational data

  • MAP Power Harness

    $53.00
    The harness provides power to the MAP Pilot and the steering pump

  • MAP Data Harness

    $50.00
    The harness provides feedback from the rudder position sensor and allows the configuration of the MAP Pilot using the Setup connector.

  • MAP Interface Cable

    $31.50
    This Interface Cable connects the MAP Pilot to the MAP MFD via Ethernet.

  • MAP Pro Setup Harness

    $66.00
    The harness is used to calibrate the steering functionality of the MAP Pro, by connecting the device to the Configuration Utility.

  • MAP Pro Power Harness

    $133.00
    The harness provides input power to the MAP Pro, and connects the MAP Pro to a reversible hydraulic steering pump. Additionally, it allows control over the in-built relays of the MAP Pro.

  • MAP Pro Control Harness

    $77.00
    The harness receives feedback from the USV rudder and sends commands to the Single or Dual Engine Controller.

  • Power Cable [MAP MFD]

    $15.00
    Harness that provides power to the MAP MFD.

  • MAP MFD USB-to-Audio Cable

    $80.00
    The harness connects the USB port of the MAP MFD to an audio device.

  • MAP EXP500 Suction Cup Mount

    $32.00
    The suction cup mount allows the operator to mount the MAP EXP500 on the windshield of a vehicle.

  • MAP EXP500 Handlebar Mount

    $32.00
    The handlebar mount allows the operator to mount the MAP EXP500 on the handlebar of a Jet Ski or motorbike.

  • MAP EXP500 Car Charger

    $16.00
    MAP EXP500 compatible car charger, to charge your battery power on the go

  • Dual Engine Controller [MAP ETK (d)]

    $1,450.00
    The Dual Engine Controller [DEC] allows the USV operator to control the throttle level of the USV running on two engines.

  • Single Engine controller [MAP ETK (s)]

    $790.00
    The Single Engine Controller [SEC] allows the USV operator to control the throttle level of the USV that runs on a single engine.

  • MAP SEC PWR/Data Harness

    $83.00
    The cable provides power to the SEC, and communicates information from the controller to the MAP ETK.

  • MAP DEC Power Harness

    $145.50
    The Cable provides power to the DEC, and allows the MAP ETK to override manual control over the USV throttle system.

  • MAP DEC Signal Harness

    $170.00
    The harness provides throttle information to the dual USV engines.

  • MAP ETK Control Harness

    $92.00
    The harness interfaces the MAP ETK with the MAP Pro and the DEC or SEC.

  • MAP ETK Setup Harness

    $92.00
    The harness allows the USV operator to configure the MAP ETK through a USB connection.

  • C2 Pro Shore Power Cable

    $293.00
    It connects to the shore power inlet of the C2-Pro, in order to charge it through a power supply of 230V/16A @ 50Hz.

  • MAP USB Joystick

    $274.00
    The MAP USB Joystick allows the USV operator to manually control the USV from a GCS.